845.679.2862 | Hours: MON-SAT 7-6 | SUN 8-5 | 84 Tinker St. Woodstock, NY 12498 | Get Store Directions
LOG IN ACCOUNT
Ice Maker Kits, Hoses, & Fitting
SharkBite ice maker outlet box installs easily. Can be used with copper, CPVC or PEX lines.
SharkBite Ice Maker Installation Kit provides a quick and easy install. Compatible with PEX (cross-linked polyethylene), CPVC (Chlorinated Polyvinyl Chloride) or copper. The slip end is only suitable for copper and CPVC. Kit includes 1 each: SharkBite Ice Maker Fitting - 1/4" (3/8" OD) x 1/4" Comp, Angle Stop 1/4 Turn lead free - 1/2" x 1/4" (3/8" OD), Coiled PEX tubing - 1/4" (3/8OD) x 10', Service Slip Tee Adapter - 1/2" x 1/2" x 1/2" slip end only suitable for copper and CPVC, Disconnect Clips - 1/4" and 1/2". Listed by IAPMO (International Association of Plumbing and Mechanical Officials) and design certified and listed to ASSE (American Society of Safety Engineers) 1061/NSF 61. Meets all UPC (Uniform Plumbing Code), IPC (International Plumbing Code), and cUPC in compliance with applicable American & Canadian codes and standards for plumbing and mechanical product certification requirements.
Everything you need to connect the water supply line to your ice maker. Includes 25' of 1/4" O.D. polyethylene tubing, 1 each 1/4" union, 2 each 1/4" delrin sleeves, 2 each 1/4" brass inserts, and 1 each self-tapping saddle valve to fit 3/8" to 1-3/8" O.D. tubing or pipe. Carded.
For connecting water supply to ice makers, humidifiers, etc. Includes self-piercing saddle valve for 3/8" to 1" OD tube with 1/4" OD outlet, 1/4" OD compression fittings for most installations, and 1/4" OD copper tubing. Carded.
Lead-free stainless steel flexible connectors. 1/4" Female compression thread on both ends to connect directly to ice maker, saddle valve, or ice maker filters. A typical installation will use the longer (84") connector between the ice maker box or saddle valve to an ice maker filter, and the shorter (12") connector between the ice maker filter and the refrigerator. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/4" x 1/4" ice maker connector. Braided stainless steel wrapped around reinforced braided PVC with brass hex connector nuts. Approved for residential, commercial, and industrial applications for water supply connections to fixtures. Core is Virgin PVC with polyester yarn braiding over-braided with stainless steel 304 for strength and durability. Chrome-plated brass nuts, and washers for a dependable hand-tight seal. Max Temp 180 F (degree Fahrenheit). Max Pressure: 125 psi (pounds per square inch). IAPMO (International Association of Plumbing and Mechanical Officials) listed.
Stainless steel flexible connectors. 1/4" Female compression thread on both ends to connect directly to ice maker, saddle valve, or ice maker filters. A typical installation will use the longer (7') connector between the ice maker filter, and the shorter (12") connector between the ice maker filter and the refrigerator.
Contains 25' poly tubing and necessary fittings, shutoff valve, and saddle valve. Do it carded. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
SharkBite 1/2" x 1/4" OD brass barb compression chrome angle stop quarter turn 1 per bag. Suitable for installing at the end of an ice maker supply line or waste drain. The SharkBite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with DZR brass and are corrosion resistant. NSF approval.
Constructed of high-impact plastic provides 1/2 In. sweat installation. The valve has Non tapered 1/2 In. threads used to secure the valve to the box and will not accept tapered threaded fittings. The brass quarter turn ball valve is included. Slim line profile for 1 In. backing. Ribbed walls add support for greater strength and better alignment. Adjustable face plate accommodates up to 7/8 In. wall thickness. Front and back nailing tabs assure solid installation. Box dimensions: 5-3/16 In. x 5-3/16 x 2-1/2 In. Face plate 6-13/16 In. x 6-13/16 In. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
Low lead 3/4" FGH to 1/4" O.D. compression. 5 per bag, individually flag tagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.